SCCL01 – Strap Clip

A 60mm vinyl strap with press-stud closer and alligator clip.

SCCLP01 – Strap Clip with Pin

A 60mm vinyl strap with press-stud closer, alligator clip with a safety pin.

SCCLA01 – Adhesive Clip

This alligator clip with a pin has an adhesive back which peels off and can be stuck to the reverse side of a plastic card when a hole or slot is not wanted.

BCHA01 – Bead Chain Adaptor

Made specifically for neck chains, this vinyl strap fits over the bead chain with a press-stud closer so cards or other holders can be added.

MGBAR01 – Magnetic Holder

This two-piece magnetised holder has an adhesive backing on one side which attaches to a card or flat surface. The other side lines up with the adhesive bar and the magnet holds the card in place. An alternative to putting pin holes or alligator teeth into clothing or to avoid punching a slot or hole into a card.

SLHP03 – Slot/Hole Punch

An ideal item to put slots, holes or corners into a plastic card. The punch sits flat on a desktop and only requires light pressure to punch through the card. It comes complete with a guide so that the holes are always uniform/central. A handy seal at the base of the punch catches the off-cuts. It will last for thousands of cards.

APCH01

This credit-card sized pouch has an adhesive back and will stick (non-permanently) to book covers, diaries or even clothing.
It can also be used on the backs of chairs for place-settings.

Product size:

• Outer 60mm x 93mm
• Insert: 54mm x 86mm

FVCH01 / FVCH02 – Economy Range

A low-priced card pouch ideal for conferences or short-term use.

Vertical size:

• Outer 110mm x 68mm
• Inner 86mm x 60 mm

Horizontal size:

• Outer 82mm x 95mm
• Inner 60mm x 86mm

FVCH21 / FHCH22 – Standard Range

A durable clear pouch. The card is secured by a chain, lanyard or clip since the plastic is the same length on both sides.

Vertical size:

• Outer 115mm x 72mm
• Inner 95mm x 63mm

Horizontal size:

• Outer 78mm x 100mm
• Inner 60mm x 90mm

FVCH11 / FVCH12 – Premium Range

The highest-quality flexible, clear vinyl pouch in our range is extra-soft and made to last. Holds a single card or single clamshell prox card.

Vertical size:

• Outer 66mm x 111mm
• Inner 58mm x93mm

Horizontal size:

• Outer 100mm x 78mm
• Inner 92mm x 63mm

FHCHN10 – Large Conference Pouch

This large size 3 compartment PVC holder fits inserts 90mm wide x 55mm high in the to front compartments and a category insert of 90mm wide x 20mm high. There is also a pocket on the reverse that will hold an insert up to 90mm wide x 130mm high. The total size of this holder is 112mm wide x 180mm high.

Tubular Fabric

Satin Fabric

Nylon Fabric

Carbineer End Hook

Alligator End Hook

Swivel End Hook

Epoxy Dome Badges

Available in full-colour in a range of sizes. Attachment options include super strength badge magnet, standard pin or standard pin and clip.

Window Epoxy Name Badges

Excellent for high staff turnover locations, our reusable full colour domed window badges are available in standard 50 x 80mm size and custom shapes and with a choice of super strength “badge magnet” that will not damage clothing, standard pin or pin & clip.

Click-In Name Tags

These come in two parts, an aluminum base and an acrylic dome cover. They may come printed with your company logo and/or staff name.

For tags without names, a name label may be pasted onto the tags. Available in gold, chrome and white.

RCCH01 – Single Holder

Suitable for a single standard plastic card. It features an optional clip or a strap clip or lanyard can be added. Cards can be displayed vertically or horizontally, open-faced.

Colours:

• black
• blue
• white
• red
• grey
• opaque.

RCD01K- Single Holder

This single card holder is open-faced and displays cards as either vertical or horizontal. It will hold a single standard plastic card but unlike RRCH01 it has a solid back.

Colours:

• black

RCD02K – Double Sided Holder

An open-faced card holder that can be hung vertically or horizontally, RCD02K holds one standard plastic card on one side and up to two standard plastic cards on the reverse. Alternatively, it can hold a clamshell prox card on the reverse.

Colours:

• black
• blue
• white
• red
• grey
• opaque

RCHM01 – Multicard Holder

This open-faced holder can accommodate up to 5 standard plastic cards on one side, or one clamshell prox with three cards, or two clamshells and a single plastic card. Cards can be displayed either horizontally or vertically.

Colours:

• black
• opaque

RRCH01 – Thumbslot Holder

A closed-faced single card holder which protects the front and the back of the card. This holder has a clear finish so the card remains visible at all times. A cut-out at the back means cards or prox cards can be easily removed and replaced after scanning or reading. RRCV01 is the vertical equivalent.

KRCH45 – Fuel Card Holder

This holder is closed-faced with a small cut-out to remove the card. It includes a key ring on a short chain.

MRR01K – Mini reel

This popular small reel has a belt clip on the back for attaching to clothing. A reinforced strap takes the ID card, pouch or holder. Available in a range of solid or translucent colours. Can be custom printed.Cord length 40cm.

MRC01K – Carbineer reel

A strong top latch attaches this reel onto clothing where a belt-clip is not considered secure enough. Available in a range of colours including: black, blue, red, green, orange and clear. Cord length 45cm.

MRH01S – heavy duty reel

Made of metal, this 25mm diameter reel comes with different end hooks. Choose from split ring or strap clip. It has a belt clip on the reverse and is preferred by hospitals where infection-control is paramount. Cord length 51cm. Can also be custom printed with your company branding.